Godefroy, Instant Eyebrow Tint, Dark Brown, 3 Application Kit

Helpful hints before you get started

• Use a lighted, magnified mirror.
• Keep a box of tissues or cotton swabs handy.
• Place an old towel or newspaper on work area to prevent staining.

Perform an allergy test for 48 hours before applying. 

Squeeze a small amount of Solution No.1 onto the end of the application stick and apply to the inside of your arm. Do the same with Solution No.2 and apply directly on top of solution No.1. Let stand 2 minutes and wipe clean. Close and secure packets with paper clip and place back in zip lock bag. Wait 48 hours. If no visible signs of irritation occur, proceed with tinting the eyebrows. Do not use this product if irritation is visible.

Tinting the Eyebrows 

Preparing the brows

1. Very Important. For best results, wash eyebrows with a mild soap and water, or use an oil free makeup remover. Let dry before tinting.
2. To protect the skin from accidental staining, apply a thin coat of petroleum jelly around the eyebrow. Be careful not to get any on the eyebrows, this could inhibit coloring process.

Application 

1. Remove work station card and squeeze entire contents of Solution No 1 and No 2 onto the marked circles. Do not mix.
2. It is best to tint one eyebrow at a time, allowing the color to process completely before starting the second eyebrow. Using enclosed applicator stick, apply solution No 1 onto the eyebrow. Let stand for 2 minutes. Gently blot dry with a tissue before proceeding to the next step.
3. Wipe applicator stick clean and apply Solution No 2 directly to the eyebrow. Let stand one minute and wipe clean with a damp tissue or cotton ball. Remove any color that may have gotten onto the skin with a damp tissue.

Helpful hint. For slightly darker, longer lasting results, reapply remaining mixture and repeat the process.

• Eyebrows have a reddish color. This usually due to staining of the skin beneath the eyebrow hair and will disappear in a day or two. To speed up the process, gently rub eyebrow area with soap and warm water.
• Staining to the skin has occurred. Stains will disappear in a day or two. To speed up the process, create a mild exfoliate of water and sugar and rub gently on the stain and rinse with water.
• My color results were not satisfactory. There could be several reasons. 1) Eyebrows were not cleaned of oil or makeup before tinting. 2) A small amount of petroleum jelly adhered to the brow hair and inhibited the color process. Wash brows clean and repeat the process.

Use only as directed. Avoid contact with skin and eyes. Contact may cause irritation or allergic reaction. If contact with eyes occurs, rinse immediately with water. Remove accidental stains from skin immediately with soap and water. Physician should be consulted if irritation persists.